ON/OFF: Press the button(4) to turn on the device. Then the blue light is on, The device begin

initializing,After initialzation complete, The blue light is off, the red light is on. The device enters

into the video recording mode, Press the button for 2 seconds, all lights will be turned off. The

device will automatically save the current file and shutdown.
Note: Dont press any button when the device is initialzing, The device will not response it.

Mode change: You can change the mode between Video recording , Photograph, Audio recording

by press the mode button.

Note: Dont change the mode of device when it is recording.

Record video: In the video mode, the device enters into the standby status.Now the red light is

on. Press the button (4) to start the video recording. The red light flashes slowly. In order to

save system power, after the beginning of the video taking for 5 seconds, the indicator light will

automatically be off while the device is still in the recording mode. If need confirm the device

status or have a new operation, please press the any button once to see the status indicator.

When the red indicator light flashes, Pressing the button again to stop recording and save the

file. Afterward the red light returns to ON mode; In order to ensure the safety and the size of the

file, the system will automatically save file every 50 minutes once, and continue the video

recording.

Note: Make sure there is adequate light in the surrounding and the camera is not blocked by

other items.

Keep the camera upright and stable. And the object should be more than 50cm from the camera.

In order to ensure good sound effect of recording, do not block the microphone hole.

Take photo: In the photo mode, the device enters into the standby status for photo-taking. Now

the blue light is on. Press the button(4). The blue light flashes one time to complete the photo

taking and image saving. Then it returns to the standby status. This function is 3 piece continuous

shooting.

Note: Make sure there is adequate light in the surrounding and the camera is not blocked by

other items.Keep the camera upright and stable. And the object should be more than 50cm from

the camera.

Record sound: In the audio mode, the device enters into the standby status.Now the red and the

blue light are on at the same time, Press the button(4) to start the sound recording, The blue light

flashes slowly.In order to save system power, after the beginning of the sound recording for 5

seconds, the indicator light will automatically be off while the device is still in the recording mode.

If need confirm the device status or have a new operation, please press the any button once to

see the status indicator. When the red indicator is on and the blue light flashes. Pressing the

button(4) again to stop recording and save the file. Afterward the blue light returns to ON mode.

Note: In order to ensure good sound effect of recording, do not block the microphone hole.

PC camera: When the power is on, you can connect the device with computer USB interface, you

can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera,

with your friends online video chat, take photos, and so on.
Note: According to the computer system configuration or difference, the computer may not

detect a camera function by once, if the computer can not enter the camera function, but into a

Udisk. Please remove the camera and connect the camera to the computer again; If you are the

first time to use the PC camera function on your computer, please install the drivers on the CD or

dealers provided. Please connect the data cable to the device at first, then connect the other side

to the Computer.

Removable Disk: In the shutdown mode, connect a computer USB interface, enter into the Udisk

function,at this time, the computer will pop up movable disk logo, the media file directory as

follows: * : \ _REC \ 100MEDIA ; During the camera and computer transfer data,the blue light flashes

rapidly; Need to uninstall the device, please click on the task bar on the bottom right corner of the

icon to the management of removable devices, uninstall the inside removable storage devices,when

the system recognizes the hardware can be safely pulled out, and then disconnect the camera and

computer connections.  

Note: According to a computer or system configuration differences, the time to identify removable

disk will be slightly different, please be patient, this period is best not to carry out the operation of

the camera, so as to avoid the impact of the computer hardware identification. If did not identify to

a removable disk for a long time,try to re-insert, if still unable to identify the hardware, make sure

that your operating system, driver, usb interface cable are all normal; please uninstall the hardware

with the normal process, so as to avoid to damage the computer or device. Please connect the data

cable to the device at first, then connect the other side to the Computer.